-
Mechanical digital readout to height & tilt angle
-
Rise/fall/tilt adjustment
- Max. profiling diameter 250mm
- Overall table length 2530mm
- Spindle speeds 3000/4500/6000/7000/10000 rpm
- Power 3 Phase
-
Fixed spindle
-
“eye-S 15” eye-level control
- Tool diameter lowered under table 300 x 85 mm
- Spindle shaft height 140 mm
- Spindle diameter 30 mm
- Spindle tilt '-
-
Tilting spindle
-
Inverter speed control
- Tool diameter lowered under table 300 x 80 mm
- Spindle shaft height 140 mm
- Spindle diameter 30 mm
- Spindle tilt '+45°/ - 45°
-
Tilting spindle
-
Inverter speed control
- Tool diameter lowered under table 300 x 75 mm
- Spindle shaft height 140 mm
- Spindle diameter 30 mm
- Spindle tilt '+45°/ - 45°
-
Fixed spindle
-
Manual rise and fall
- Tool diameter lowered under table 300 x 85 mm (320 x 85)
- Spindle shaft height 140 mm
- Spindle diameter 30 mm
- Spindle tilt '-
-
Integrated sliding table
-
Fixed spindle
- Tool diameter lowered under table 320 x 85 mm
- Spindle shaft height 140 mm
- Spindle diameter 30 mm
- Spindle tilt '-
-
Tilting spindle
-
Manual rise, fall and tilt adjustment
- Tool diameter lowered under table 320 x 60 mm
- Spindle shaft height 140 mm
- Spindle diameter 30 mm
- Spindle tilt '+45°/ - 45°
-
Tilting spindle
-
“READY" powered adjustment
- Tool diameter lowered under table 300 x 43 mm
- Spindle shaft height 140 mm
- Spindle diameter 30 mm
- Spindle tilt '+45°/ - 45°
-
Fixed spindle
-
Manual rise and fall
- Tool diameter lowered under table 240 x 80 mm
- Spindle shaft height 125 mm
- Spindle diameter 30 mm
- Spindle tilt '-
-
Fixed spindle
-
Manual rise and fall
- Tool diameter lowered under table 320 x 85 mm
- Spindle shaft height 140 mm
- Spindle diameter 30 mm
- Spindle tilt '-
-
Tilting spindle
-
Manual rise, fall, tilt adjustment
- Tool diameter lowered under table 240 x 80 mm
- Spindle shaft height 125 mm
- Spindle diameter 30 mm
- Spindle tilt 0 - 45°
-
Manual rise and fall
-
Three spindle speeds
- Tool diameter, max. 210 mm
- Tool diameter lowered under table, max. 180 mm
- Useful spindle length, max. 100 mm
- Spindle diameter 30 mm
-
Max. tool dia. 210 mm
-
Manual rise and fall
- Tool diameter, max. 210 mm
- Tool diameter lowered under table at 90°, max. 240 mm
- Useful spindle length, max. 125 mm
- Spindle diameter 30 mm
-
1000 mm sliding table
-
Optional tilt adjustment
- Tool diameter, max. 210 mm
- Tool diameter lowered under table at 90°, max. 180 mm
- Useful spindle length, max. 100 mm
- Spindle diameter 30 mm
-
1200 mm sliding table
-
Optional tilt adjustment
- Tool diameter, max. 210 mm
- Tool diameter lowered under table at 90°, max. 240 mm
- Useful spindle length, max. 125 mm
- Spindle diameter 30 mm
-
Manufactured in the UK
-
Cast iron spindle assmebly
- Tool diameter, max. 125 mm
- Profiling cutter diameter, max. 210 mm
- Retractable tool size, max. 150 x 105 mm
- Spindle length 125 mm
-
Manufactured in the UK
-
Tilt spindle, forwards and backwards
- Tool diameter, max. 150 mm
- Profiling cutter diameter, max. 255 mm
- Retractable tool size, max. 180 x 65 mm
- Spindle tilt (+) 5° - (-) 45°
-
Table extentions infeed & outfeed
-
Tenoning table and protection hood (max tool dia 275mm)
- Max. useable spindle length 100mm
- Spindle speeds 3500/7000/10000
- Tilting spindle 90° - 45°
- Max. tool dia. profiling 210mm
-
Cast iron construction
-
Hand operated brake
- Max. working depth 150mm
- Table size 915 x 810mm
- Size of fence plates 150 x 450mm
- Speeds 5000/7500 rpm
-
Images for illustrative purposes only
-
Cast iron construction
- Max. working depth 150mm
- Table size 915 x 810mm
- Size of fence plates 150 x 450mm
- Motor 3.7kW
There are no used machines to show for this product type.
-
Sedgwick SM spindle moulder – ideal for smaller companies or start ups
To satisfy restricted budgets without compromising on quality the Sedgwick SM spindle moulder is available with a straight or fixed shaft and can be configured with a range of optional accessories including infeed and outfeed extension tables and sliding table for tenoning work.
