SCM Olimpic K 230 Evo

Product Information

• Features
  • Up to 3 mm coiled edging
  • Up to 3 mm solid edging
  • Optional pre-milling
  • Optional rounding unit
  • “Orion One Plus” control
  • Single-block steel machine frame
  • Numeric readout of the selected panel
  • Telescopic front panel support
  • Safety enclosure
  • Electrical cabinet with PLC, padlockable main switch and overload protection
  • Emergency pushbutton
• Description

  The SCM K 230 Evo is an industrial edgebander, easy to use and equipped with everything you need for the complete and professional processing of panels. The “Orion One Plus” control interface features a 4” display with soft touch keyboard for the selectin of the different operating units and machine functions.

  The K 230 Evo is available in three compositions.

  Composition “A” – Glue Unit, Guillotine, End Cutting, Trimming Unit, with space for 2/ 3 additional finishing units.

  Composition “T” – Pre-milling, Glue Unit, Guillotine, End Cutting, Trimming Unit, with space for 2/ 3 additional finishing units.

  Composition “T-ER1” – Pre-milling, Glue Unit, Guillotine, End Cutting, Trimming Unit, Corner Rounding, edge scraping unit, with space for 2 additional finishing units.

  Basic Machine Units

  Pre-Milling Unit (K 230 Evo T/ T-ER1 models only)
  “RT-V1” – It trims the panel edge obtaining a perfect uniform surface for the glue application and a perfect jointing line with the edge.

  Gluing Unit
  “VC-V1” – It carries out the automatic gluing with hot melt glue of edges in rolls and strips on straight panels.

  End Cutting Unit
  “K-1” – single-motor end cutting unit It carries out the cutting of the front and rear exceeding edge.

  Trimming Unit
  “R-K” – It carries out the trimming of the top and bottom exceeding edge.

  Corner Rounding Unit (K 230 Evo T-ER1 model only)
  “ROUND-1” – It carries out the automatic rounding of front and rear plastic edges angle of straight panels and panels with “radius” (see working examples).

  Optional Finishing Units
  Edge Scraping Unit
  “RAS-V” – It eliminates the presence of notches left from the tools during the trimming from the plastic edges.

  Glue Scraping Unit
  “RC-N” – It eliminates any excess of glue in the joint between panel and edge. It is also possible the removal of small edge exceeding (0,1 mm for 1 mm edges). Suitable for machining panels coming from nesting cycle.

  Brushing Unit
  “SP-M” – With two independent motors (0,14 kW 2.800 rpm) for the cleaning/polishing of the edge.

• Specification
  • Edging thickness, min. - max. 0.4 - 3 mm
  • Sold edging thickness, max. 3 mm
  • Panel thickness, min. - max. 8 - 60 mm
  • Panel length, min. 160 mm
  • Panel width, min. 100 mm
  • Feed speed 9 m/min
  • Glue pot capacity 1.5 kg
  • Extraction outlet(s) Information available on request
  • Power 3 phase
• Literature
  • SCM Olympic range Download
• Important information

  Our suppliers have a policy of continuous product development and improvement, specifications are therefore subject to change without notice. We can accept no liability for discrepancies in specifications or illustrations contained in our publications or the publications of our suppliers.