Stenner ST130

Band Resaws

Full details of Stenner ST130

Configure your machine

- +

more information

  • Features
    • Power operated fence
    • Heavy cast bandwheels
    • Full cast iron table
    • Pneumatic saw straining
    • HMI control unit
    • Automatic blade lubrication
    • Multi roller fence
    • Large saw to fence capacity
    • Braked motor
    • Pitless construction
    • Key operated starter
    • Interlocked doors
    • Fault diagnostic
    • Note - compressed air supply requried
    • Manufactured in the UK
  • Description

    The ST130 combines the performance available from a 130mm wide bandsaw with the convenience of a machine that requires no special fixing other than bolting it to the factory floor. The resulting package is a very high performance radial arm resaw capable of producing quality sawn timber from even the largest of cross sections. As a standard the machine includes key features which ensure both its performance and its reliability. These include a power operated heavy duty multi-roller fence; a genuine radial arm operated by “soft” pneumatics ensuring both safe movement and maximum drive; heavy duty table rollers and operation and diagnostics undertaken by a single HMI controller.

    The ST130 can be further uprated by adding drive to the table rollers, their speed being automatically synchronised with the radial arm feed. The HMI can be relocated in a remote control pedestal and a programmable fence setting system incorporated. In addition where a number of different species are to be sawn then variable blade speed can be provided to optimise performance.

  • Specification
    • Control Machine mounted
    • Pulley wheel diameter 950 mm (37.5")
    • Blade length, min. - max. 5637 - 5765 mm
    • Blade width 130 mm (5")
    • Blade kerf 1.06 mm
    • Saw to fence capacity 305 mm
    • Saw to feed capacity 300 mm
    • Depth of cut, max. 400 mm
    • Fence tilt 0 - 35°
    • Working height 955 mm
    • Feed speed, infinitely variable 5 - 60 m/min
    • Cleaner fluid capacity 5 ltr
    • Extraction outlet(s) 1 x 175 mm
    • Compressed air 6 - 8 bar
    • Motor 30 kW (40 HP)
    • Power 3 phase
  • Literature
  • Important information

    Our suppliers have a policy of continuous product development and improvement, specifications are therefore subject to change without notice. We can accept no liability for discrepancies in specifications or illustrations contained in our publications or the publications of our suppliers.

Tooling & Spare Parts

Tooling and consumables as well as new and legacy spare part supply are available from our Support Services department.

Operator Training

We provide a range of training services from basic familiarisation to full certification covering both new and existing machinery.

Installation & Commissioning

Our factory trained installation engineers are available to setup your machinery ready for use.

Delivery

It is recommended that high quality equipment of this type be delivered using own specialist HI Ab service.

Make an enquiry about this product

Complete this form and one of our friendly team of experts will contact you.