SCM Minimax CU 410E

Combination Saw, Spindle, Planer, Thicknesser

Features
  • Saw, spindle, planer & thicknesser
  • 1600/ 2250/ 2600 mm table stroke
  • 410 mm planer width
Description

The SCM Minimax C 410E is a combination circular saw, spindle moulder and planer thicknesser in one machine.

Planer Thicknesser

The thicknessing table is manually adjusted, w...

Full description and features

Configure your machine

Scoring unit * 

Sliding table * 

Mitre fence * 

Cutterblock * 

Tables & fences

Spindle tilt * 

Spindle type * 

Spare spindle

Motor * 

Safety * 

- +

Product Information

  • Features
    • Saw, spindle, planer & thicknesser
    • 1600/ 2250/ 2600 mm table stroke
    • 410 mm planer width
    • Rise, fall, tilt adjustment
    • Manual controls
    • Crosscut mitre fence
    • Two flip over stops
    • Adjustable spindle fence
  • Description

    The SCM Minimax C 410E is a combination circular saw, spindle moulder and planer thicknesser in one machine.

    Planer Thicknesser

    The thicknessing table is manually adjusted, while the long 2000 mm surfacing tables provide support for the most demanding operations. The machine features. The machine offers a choice of three cutterblocks; high speed steel (HSS), “TERSA” or “Xylent”.

    A traditional HSS cutter block is supplied as standard. An optional “TERSA” cutter block can also be specified for fast knife changing with no set up required.

    For ultimate performance the optional “Xylent” spiralknife cutterblock with 3 series of knives is designed to give an exceptional finish. Reduced noise during machining provides a more comfortable working environment. It also improves the dust extraction due to the production of very small chips. Each cutter has 4 tips which can be rotated into the cutting position when worn. Therefore increasing the production life of the cutter block before knives require replacement.

    Circular Saw

    The CU 410E features a 360 mm wide 1600 mm long aluminium sliding table. The 1200 x 650 mm squaring frame includes a crosscut mitre fence with 2 flip over stops and eccentric clamp.

    The 315 mm maximum blade diameter with manual rise, fall and tilt adjustments has a projection of 100 mm at 90°.

    Spindle moulder

    Manual rise and fall spindle adjustment. Adjustable spindle moulder fence with micrometric adjustment, vertical and horizontal pressures.

  • Specification
    • Blade diameter, max. 315 mm
    • Cutting depth, max. 100 mm
    • Blade tilt 0 - 45°
    • Cast iron table size 1250 x 430 mm
    • Squaring stroke, max. 1600 mm
    • Rip fence capacity 1050 mm
    • Rip fence adjustment Manual
    • Tool diameter, max. 210 mm
    • Tool diameter lowered under table, max. 240 mm
    • Useful spindle length, max. 125 mm
    • Spindle diameter 30 mm
    • Spindle speeds 3500/ 6000/ 8000/ 10000 rpm
    • Surfacing width capacity 410 mm
    • Thicknessing depth, min. - max. 3 - 230 mm
    • Cutting depth infeed table adjustment 0 - 5 mm
    • Surfacing table length, overall 2000 mm
    • Thicknessing table length 775 mm
    • Cutterblock diameter 87 mm
    • Cutterblock type High Speed Steel (HSS)
    • Number of knives 3
    • Feed speed(s) 6 & 12 m/min
    • Fence tilt 0 - 45°
    • Extraction outlet(s) 3 x 120 mm
    • Motor 3 x 4 kW (5.5 HP)
    • Power 3 phase
  • Literature
  • Important information

    Our suppliers have a policy of continuous product development and improvement, specifications are therefore subject to change without notice. We can accept no liability for discrepancies in specifications or illustrations contained in our publications or the publications of our suppliers.

Make an enquiry about this product

Complete this form and one of our friendly team of experts will contact you.

Subtotal

excl VAT

incl VAT

Call
Call us on 0115 986 5201 or