Used
- Working width 1000 mm
- Max. thickness 150 mm
- Motor power 11.2 kW
Used
- Capacity 220 x 120 mm
- Variable feed speed 6 - 12 m/min
- Motors Top, bottom, shared side each 5.5 kW (7.5 HP)
- Power 3 phase
Used
- Pulley wheel diameter 915 mm (36")
- Blade width 100 mm (4")
- Saw to fence capacity 230 mm (9")
- Depth of cut 405 mm (16")
Used
- Maximum grinding capacity 335 mm
- Maximum length of cutter profile 335 mm
- Maximum diameter of cutting circle 350 mm
Bilateral linear action providing profiling & straight knife grinding
Will shape and regrind moulder knives in the block
Used
- Max working capacity 230 x 130 mm
- Max finished work size 220 x 120 mm
- Infinitely variable feed speeds 5-15 m/min
- Bottom and top head motors 5.5 kW (7.5 HP) each
Used
- Motor 3 kW (4 HP)
- Admits timber 250 x 200 mm (10" x 8") using 100 mm (4") chisels
- Takes chisels 25 mm (1") square
- Boring bits 50 mm (2") dia
Vibratory head
Used
- Maximum board size 3200 x 1900 mm
- Max depth of cut 50 mm
- Speed 4800 rpm
- Sawblade diameter 250 mm
Used
- Rise and fall table size 760 x 700 mm (30" x 27.5)
- Two speeds 6000 and 24000 rpm
- Throat capacity 610 mm (24")
Used
- Motor 1.1 kW (1.5 HP)
- Admits work up to 405 mm (16") dia x 1675 mm (66") long
- Will swing (in the gap) 710 mm (28") x 305 mm (12")
Used
- Five motors 1.5 kW (2 HP) each
- Admits timber up to 355 x 115 mm (14" x 4.5")
- Cuts tenons up to 127 mm (5") long in one operation
Used
- Two vertical head motors 2.2 kW each
- Eight horizontal head motors 1.6 kW each
- Two motorised head adjustment motors 1.3 kW
- Standard max working length 1600 mm
Head adjustment via pneumatic cylinder
Combination of electro-pneumatic drills, spindles and gearboxes
Used
- Eight speeds 2-33 m/min
- Diameter of feed rollers 120 mm
- Motor 0.52/0.75 kW
- Roller spring travel 20 mm
Used
- Variable feed speeds 4-25 m/min (10-80 fpm)
- Max sawblade width 76 mm (3")
- Two motors 11.2 (15 HP) to saw
- Max depth under sawguide 325 mm (13")
Tilt table
Used
- Table size 915 x 810 mm (36" x 32")
- Top piece diameter 30 mm
- Speeds 4500 and 6000 rpm
- Motor 3.7 kW (5 HP)
Used
- Disc diameter 405 mm (16")
- Table size 635 x 230 mm (25" x 9")
- Linisher size 150 mm (6")
- Linisher table size 470 x 180 mm (18.5" x 7")
2 of 4 pages. 55 results.
WOODWORKING MACHINERY OPERATOR TRAINING
We are a PIABC quality assured centre providing certificated woodworking machinery training courses for operators and supervisors covering all types of woodworking machinery, hand held power tools and abrasive wheels.
Established for over 115 years
Servicing, support & spares
New, serviced and rebuilt machines
Certificated operator training